Recommendations

Asphalt (IMCA Type) Modifieds

• For IMCA  Approved shocks use part number GSN1## - #, the N stands for non Schrader valve.

• We highly recommend that you check with your chassis builder for their latest  recommendations as technology changes very frequently.

• You should check gas pressures in shocks before every race as they sometimes will leak off.

• Valving numbers or values vary from manufacturer to manufacturer. For example one company's 4 valving is not necessarily the same as another company's.

• Genesis Shocks with Schrader valve you can adjust the gas pressure. You can run anywhere from 30 psi up to 200 psi always use Nitrogen or dry air that has been run thru Cam Air system.

• You can run the gas pressure down to 40# in real slick conditions but with Genesis Shocks you really don’t need to vary much off the 75# to 85# range unless it’s rough. Then go up to 100# to 125#.

• If the shocks compression is a 7 or higher more gas pressure is required use 150# to 200#

• Always check the travel on all shocks for rebound extension and compression travel as some cars need a 1" or 2" shock extensions in some applications.

• 3675 Coil Over Kit for 5" Springs for GS0 and GS1 series shocks.

• 3600 Coil Over Kit for GS1-GS0 Series Shocks is required for coil over applications with 2 1/2 springs.

• Also available in the GS1 series are standard valvings like GS175, GS176, GS194 and GS195 and so on.

 GD|GS0||GS1|GS3| G0|G1|G2|G3|G4|G5|G6|G7|G8 Shock Series.

2012 Genesis Racing Shocks Catalog

Shock Accessories

Genesis Racing Shocks Apparel

Coil Over Springs

 Genesis Racing Shocks

5020 Old Ellis Point - Suite 200

Roswell, Georgia  30076

678-659-9454

Fax 678-659-9457

e - mail - Genesisinfo@Genesisshocks.com

Copyrighted © March 2006 - 2012