Recommendations

Dirt Crate Motor Late Models

Max Blair

2008, 2010 and 2011 Fastrak Weekly National Points Champion.

Series Steel Non-Bulb Non Adjustable Shocks.

The GD series is approved for The DIRTcar Series use!

Slick Track *

* Some cars run a shock in front of the left rear to control the motion on acceleration and braking like a GD94-0 or GD95-0 for Sweeping corner tracks and GD96-0 or a GD96-2 for tighter corner tracks. And on slick tracks when hunting for more traction some cars use a dummy shock GD90. Adjust your gas pressure accordingly any where from 50 psi to 200 psi.

* In some cases you can increase the rebound in the right front shock to help the car turn in and thru the middle of the corner like a GD73-6, GD73-7, GD73-8 or GD74-6, GD74-7 or GD74-8 or even higher rebound.  But in some situations you will get loose and lose traction from the middle of the corner and off so other adjustments will have to be made to get traction back off the corner.

Barry Wright

Slick Track *

Bob Pierce Race Cars

Slick Track *

GRT

Slick Track *

Larry Shaw

Slick Track *

Lazer Chassis

Slick Track *

MasterSbilt

Slick Track *

Rayburn

Slick Track *

Rocket

Slick Track *

Swartz

Slick Track *

Trak-Star - By Mike Boland

Slick Track *

Warrior

Slick Track *

• We highly recommend that you check with your chassis builder for their latest  recommendations as technology changes very frequently.

• You should check gas pressures in shocks before every race as they sometimes will leak off.

• Valving numbers or values vary from manufacturer to manufacturer. For example one company's 4 valving is not necessarily the same as another company's.

• Genesis Shocks with Schrader valve you can adjust the gas pressure. You can run anywhere from 30 psi up to 200 psi always use Nitrogen or dry air that has been run thru Cam Air system.

• You can run the gas pressure down to 40# in real slick conditions but with Genesis Shocks you really don’t need to vary much off the 75# to 85# range unless it’s rough. Then go up to 100# to 125#.

• If the shocks compression is a 7 or higher more gas pressure is required use 150# to 200#

• All Genesis Shocks have Schrader valves so you can adjust the gas pressure. You can run anywhere from 30 psi up to 200 psi always use Nitrogen.

• Always check the travel on all shocks for rebound extension and compression travel as some cars need a 1" - 3010 or 2" - 3020 shock extension in some applications.

• Some cars run a shock in front of the left rear to control the motion on acceleration and braking like a G194-0 or G195-0 for Sweeping corner tracks and G196-0 or a G196-2 for tighter corner tracks. And on slick tracks when hunting for more traction some cars use a dummy shock G190. Adjust your gas pressure accordingly any where from 75 psi to 200 psi.

• Some cars will run a shock in back of the left rear like a G190, G192 or a G193 to gain traction on acceleration.

• Also available in the G1 series are standard valvings like G175, G176, G193, G194 and G195 and so on in any rebound or compression valving.

• 3500 Coil over kit is required for coil over applications.

* Note on some cars the right front upper control arm will hit the shock or bulb. If more control arm clearance is needed, order your right front shock with a 5350 small diameter bulb.  (G1S7#-# Shock).

* For Extreme Slick You Can Use G175-1 or G176-1 On Left Front Shocks.

* In some cases you can increase the rebound in the left rear in front of the axle to slow down the movement timing and loosen the car on corner entry.

• With the G3 Double Adjustable shock use part number G375D for 7”  shock and adjust accordingly.

• With the G3 Double Adjustable shock use part number G395D for 9” shock and adjust accordingly.

•  With the G3 Double Adjustable shock use part number G3SO75D for 7” small bulb with off set eyering.

2011 Genesis Racing Shocks Catalog

Genesis Racing Shocks Instructions Sheet

Adjustable Genesis Racing Shocks Instructions Sheet

Shock Accessories

 GD|GS0||GS1|GS2|GS3|G0|G1|G2|G3|G4|G5|G6|G7|G8 Shock Series.

GB1|GB2|GB3 Base Valve Shock Series

 Genesis Racing Shocks

5020 Old Ellis Point - Suite 200

Roswell, Georgia  30076

678-659-9454

Fax 678-659-9457

e - mail - Genesisinfo@Genesisshocks.com

ACopyrighted © March 2006 - 2011