Non Adjustable Shock Absorbers

The G1 is a mono-tube, non-adjustable gas shock absorber.  It's available in 5" - 6" - 7" and 9" stroke and any possible valving or split valving.  It has a fully anodized aluminum body with a large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke.

Features

• Large 48mm bore for maximum control.

• Largest 75mm built on gas reservoir.

• High strength 10 turns per inch external threads with adjusting nut locking grooves.

• Positive stainless steel no-drag scraper to keep any dirt and debris out.

• Hollow chrome-moly shaft.

• Low friction Teflon lined self lubricating 1/2 inch bearing on both ends.

• The finest high quality, high viscosity index shock absorber oils.

• Proprietary Dynamic Gas Pressure Control, keeps pressure low while supporting compression valve values.

• Double checked  low-speed valving design with ± .00004" precision components.

The G1 is completely rebuildable, and revalvable.

• Coil Over Kit for G1 series with 2 1/2 springs - part number 3500

 G0|G1|G2|G3|G4|G5|G6|G7|G8 Series

Genesis Offers  Camair Products

Genesis Racing Shocks Instructions Sheet

Shock Accessories

Genesis Racing Shocks Apparel

 Genesis Racing Shocks

5020 Old Ellis Point - Suite 200

Roswell, Georgia  30076

678-659-9454

Fax 678-659-9457

e - mail - info@Genesisshocks.com

1

Copyrighted © March 2006 - 2007