Single Adjustable Shocks

Genesis G2 Adjustable Instructions Sheet

The G2 is a mono - tube single adjustable it's available in 5" - 6" - 7" and 9" stroke and any possible valving or split valving.

The G2 has a fully anodized aluminum body with a large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke.

The G2 is completely rebuildable - revalvable.

Features

• Large 48mm bore for maximum control.

• Largest 75mm built on gas reservoir.

• High strength 10 turns per inch external threads with adjusting nut locking grooves.

• Positive stainless steel no-drag scraper to keep any dirt and debris out.

• Hollow chrome-moly shaft.

• Low friction Teflon lined self lubricating 1/2 inch bearing on both ends.

• The finest high quality, high viscosity index shock absorber oils.

• Proprietary Dynamic Gas Pressure Control, keeps pressure low while supporting compression valve values.

• Double checked  low-speed valving design.

• Completely independent rebound and compression adjustment.

• If more Extended length is needed as in a shock extension it MUST be specified on shock when ordering like below

You must set nitrogen pressure before use

As all Adjustable Shocks are shipped without  nitrogen.

Caution

Do not force pointer beyond the number range,

As this may result in internal damage.

To Adjust the Compression or Rebound

To Adjust: Turn knob until arrow points to desired valve setting.

Rebound Side Adjustment

Compression Side Adjustment

Genesis G2 Adjustable Instructions Sheet

Shock Accessories

Genesis Offers  Camair Products

Genesis Racing Shocks Apparel

 G0|G1|G2|G3|G4|G5|G6|G7|G8 Series

5020 Old Ellis Point - Suite 200

Roswell, Georgia  30076

678-659-9454

Fax 678-659-9457

e - mail - info@Genesisshocks.com

Copyrighted © 2006