G7 Series

Small Body Single Adjustable Shocks.

The G7 is a small body mono-tube, single adjustable shock it's available in 5" - 6" - 7" and 9" stroke and any possible valving.

The G7 has a fully anodized aluminum body with a large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke.

The G7 is completely rebuildable - revalvable and now even upgradable to the G8 Double adjustable.

Features

Super lightweight with large 38mm bore.

63mm built on gas reservoir.

10 turn per inch 2 - lead thread with adjusting nut locking grooves.

Positive stainless steel no-drag scraper to keep any dirt and debris out.

Hollow chrome-moly shaft.

Low friction Teflon lined self lubricating 1/2 inch bearing on both ends.

The finest high quality, high viscosity index shock absorber oils.

Double checked low-speed valving design.

Completely independent rebound and compression adjustment.

If more Extended length is needed as in a shock extension it MUST be specified on shock when ordering like below

Standard Eyering Lengths
Series	Extended Length	Compressed Length	Travel	Weight
G7 - 5"	15 3/4	11 1/4	4 1/2 inch	#2.3
G7 - 6"	17 3/4	12 1/4	5 1/2 inch	#2.5
G7 - 7"	19 3/4	13 1/4	6 1/2 inch	#2.6
G7 - 9"	24 3/4	15 3/4	9 inch	#3.0