Steel Non-Bulb Non Adjustable Shocks - $189.00
 

Approved for Wissota Mid West Mods and Super Stock

The GS0 is a mono-tube, non-adjustable gas shock absorber.  It's available in 7" and 9" stroke and any possible valving or split valving. 

 

Features

  • Large 48mm bore for maximum control.

  • Positive stainless steel no-drag scraper to keep any dirt and debris out.
  • Solid Carbo-Nitrided Alloy shaft.
  • Low friction Teflon lined self lubricating 1/2 inch bearing on both ends.
  • The finest high quality, high viscosity index shock absorber oils.
  • Double checked  low-speed valving design with ± .00004" precision components.

The GS0 is completely rebuildable, and revalvable.

With or without Schrader Valves according to your Rules.

  • Coil Over Kit for GD,GS0 and GS1 series with 2 1/2 springs - part number 3600

  • Coil Over Kit for GS0 and GS1 series with 5" ID springs - part number 3650
Series Extended Length Compressed Length  Travel Weight
GS0 - 7" 19 1/4 12 3/4 6 1/2 inch #3.7
GS0 - 9" 23 1/4 14 3/4 8 1/2 inch #4.2

Building Winners And Champions One Race At A Time!

Approved!

Austin Kaplan

Kevin Sather
 

Ben Stephens

Dave Hess Jr.
 

Brandon "Red" Monson

Vic Vena

  • 3600 Coil Over Kit for GD, GS0 and GS1 Series Shocks is required for coil over applications with 2 1/2 springs.

  • 3675 Coil Over Kit for 5" Springs for GS0 and GS1 series shocks.

  • We highly recommend that you check with your chassis builder for their latest  recommendations as technology changes very frequently.

  • Always check the travel on all shocks for rebound extension and compression travel as some cars need a 1" or 2" shock extensions in some applications.

  • Also available in the GS0 and GS1 series are standard valvings like GS075, GS076, GS094 and GS095 and so on.

  • Some cars run a shock in front of the left rear to control the motion on acceleration and braking like a GS0194-0 or GS195-0 for Sweeping corner tracks and GS0196-0 or a GS0196-2 for tighter corner tracks. And on slick tracks when hunting for more traction some cars use a dummy shock GS0190. Also available in GS1 & G1 series. Adjust your gas pressure accordingly any where from 50 psi to 200 psi.

 GD|GS0||GS1|GS2|GS3| G0|G1|G2|G3|G4|G5|G6|G7|G8 Shock Series.

GB1|GB2|GB3 Base Valve Shock Series

2012 Genesis Racing Shocks Catalog

Genesis Offers  Camair Products

Genesis Racing Shocks Instructions Sheet

Shock Accessories

Genesis Racing Shocks Apparel

 Genesis Racing Shocks

5020 Old Ellis Point - Suite 200

Roswell, Georgia  30076

678-659-9454

Fax 678-659-9457

e - mail - Genesisinfo@Genesisshocks.com

Copyrighted © 2006-2010